Skip to main content

ﺑﮩﺖ ﺑﻮﻟﺘﯽ ﺗﮭﯽ ﻧﮧ ﻣﯿﮟ

Image
By



ﺑﮩﺖ ﺑﻮﻟﺘﯽ ﺗﮭﯽ ﻧﮧ ﻣﯿﮟ
ﺑﮩﺖ ﺳﺮ ﮐﮭﺎﺗﯽ ﺗﮭﯽ
ﺑﮩﺖ ﺗﻨﮓ ﮐﺮﺗﯽ ﺗﮭﯽ
ﻟﯿﮑﻦ ﺍﺏ ﻣﯿﮟ ﺑﮩﺖ ﺍﮐﯿﻠﮯ ﺑﮩﺖ ﺧﺎﻣﻮﺵ
ﺑﮩﺖ ﭼﭗ ﭼﺎﭖ ﺭﮨﺘﯽ ﮨﻮﮞ
ﺍﺏ ﮐﻮﺋﯽ ﺑﻮﻟﮯ ﺑﮭﯽ ﺗﻮ ﻣﯿﺮﺍ ﺩﻝ ﻧﮩﯿﮟ
ﮐﺮﺗﺎ ﺑﻮﻟﻨﮯ ﮐﻮ
ﺍﺏ ﻣﯿﮟ ﮐﺴﯽ ﺳﮯ ﮐﻮﺋﯽ ﺗﻌﻠﻖ ﻧﮩﯿﮟ
ﺭﮐﮭﺘﯽ
ﺍﺏ ﻣﯿﮟ ﮐﺴﯽ ﺳﮯ ﺩﻭﺳﺘﯽ ﺑﮭﯽ ﻧﮩﯿﮟ
ﮐﺮﺗﯽ
ﮐﯿﻮﮞ ﮐﮯ ﻣﯿﮟ ﻧﮯ ﺟﺎﻥ ﻟﯿﺎ ﮨﮯ
ﻣﯿﮟ ﮐﺴﯽ ﮐﮯ ﻗﺎﺑﻞ ﻧﮩﯿﮟ ﮨﻮﮞ
ﻣﯿﺮﯼ ﺫﺍﺕ ﺳﻮﺍﺋﮯ ﺗﮑﻠﯿﻔﺎﺕ ﮐﮯ ﺍﻭﺭ ﮐﭽﮫ
ﻧﮩﯿﮟ ﺩﮮ ﺳﮑﺘﯽ
ﻣﯿﮟ ﻧﮯ ﺧﻮﺩ ﮐﻮ ﺑﮩﺖ ﺍﮐﯿﻼ ﮐﺮ ﺩﯾﺎ ﮨﮯ
ﺍﺏ ﻣﺠﮭﮯ ﺍﮐﯿﻠﮯ ﺍﻭﺭ ﺧﺎﻣﻮﺵ ﺭﮨﻨﺎ ﭘﺴﻨﺪ
ﮨﮯ
ﭘﺮ ﭘﮭﺮ ﺑﮭﯽ ﺍﯾﮏ ﺑﻮﺟﮫ ﺳﺎ ﮨﮯ ﺩﻝ ﭘﺮ
ﻣﯿﮟ ﻧﮯ ﮐﺒﮭﯽ ﮐﺴﯽ ﮐﺎ ﺑﺮﺍ ﻧﮩﯿﮟ ﭼﺎﮨﺎ
ﭘﮭﺮ ﺑﮭﯽ ﮨﺮ ﺑﺎﺭ ﮐﯿﺴﮯ ﮐﺴﯽ ﮐﻮ ﺗﮑﻠﯿﻒ
ﺩﮮ ﺩﯼ
ﻣﯿﮟ ﭨﻮﭦ ﭼﮑﯽ ﮨﻮﮞ ﺧﺘﻢ ﮨﻮ ﭼﮑﯽ ﮨﻮﮞ
ﻣﺮ ﭼﮑﯽ ﮨﻮﮞ
ﺳﻨﻮ ﺍﺏ ﺑﮩﺖ ﺧﺎﻣﻮﺵ ﺭﮨﺘﯽ ﮨﻮﮞ
ﺑﮩﺖ ﭼﭗ ﭼﺎﭖ ﺭﮨﺘﯽ ﮨﻮﮞ

Labels

Labels:

Comments

Post a Comment

Popular posts from this blog

cs302 Solved Quiz

By
estion # 1 of 10 ( Start time: 03:03:55 PM )  Total Marks: 1    Divide-by-32 counter can be acheived by using   Select correct option:   Flip-Flop and DIV 10  Flip-Flop and DIV 16   Flip-Flop and DIV 32  DIV 16 and DIV 32 Question # 2 of 10 ( Start time: 03:05:20 PM )  Total Marks: 1   The counter states or the range of numbers of a counter is determined by the formula. (“n” represents the total number of flip-flops)   Select correct option:   (n raise to power 2)  (n raise to power 2 and then minus 1)  (2 raise to power n) (2 raise to power n and then minus 1) Question # 3 of 10 ( Start time: 03:06:36 PM )  Total Marks: 1   A 4- bit UP/DOWN counter is in DOWN mode and in the 1010 state. on the next clock pulse, to what state does the counter go?   Select correct option:   1001  1011  0011  1100 Question # 4 of 10 ( Start time: 03:07:37 PM )  Tot...
Post a Comment
Read more

CS401 Assignment#1 Solution Spring 2018

By
Assignment No. 1 Graded Semester Spring 2018 Computer Architecture and Assembly Language Programming– CS401 Total Marks: 15 Due Date: 10/05/2018 Question: 1                                                                                                                                        [15...
2 comments
Read more

Array Basic

By
TOPIC : ARRAY Array is used to store collection of variables of same data type. It may be single dimensional type or multidimensional type.Arrays help a lot ,instead of defining variables again and again , use a single array with multiple variables you want to define. It consists of contiguous memory locations, lowest address corresponds to first element in the array. Single dimensional arrays Syntax: type arrayname[ array size] = {}; Type:  type can be any c++ data type Array size:  array size must be integer constant greater than zero Array name:  valid c++ identifier Example :    int x[1]={10};             ==>  Note:   x is an array of one integer with array size one. Example :    int x[10];                     ==>  Note:   here x is an array of 10 integers                 ...
Post a Comment
Read more